1
/
1

The 240B drill

With the 240B combo drill, you can switch between rock drilling and core drilling with a bit guide and motor change for greater versatility on jobsites. Use it to drill within a 4-foot patch, and core and drill 5/8- to 2-1/2-inch-diameter holes to 18 inches deep. The fully pneumatic drill can operate at three speeds – 400, 900 and 1,600 rpm – and requires a minimum of 77 cfm. The rock drill configuration requires 100 cfm. Both rock and core drill motors and bit guides are included with the 240B drill.

Horizontal Position data Vertical Position data
Lower Length (A)51 3/8 in (130.5 cm)
Lower Length w/ Back Wheel Removed46 in (116.8 cm)
Width (B)12 in (30.5 cm)
Height (C)30 in (76.2 cm)
Weight285 lbs (104.4 kg)
Drill Distance From Corner6 in (15.2 cm)
Drill Distance From Ground3 in (7.6 cm)
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Rock Drill Motor (pneumatic)CP 32A
Drill Motor Weight54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)100 cfm (2.8 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)36 fpb (49 J)
Hammer Speed2200 bpm
Speed288 rpm
Core Drill Motor (pneumatic)CS Unitec
Drill Motor Weight18 lbs (8 kg)
Bit Connection1 1/4 in x 7 in UNC
Air Consumption (minimum)77 cfm (2.2 m 3 /min)
Air Motor2.1 HP (1.6 kW)
3 – Speed400 rpm, 900 rpm, 1600 rpm
Lower Length (A)24 1/2 in (62.2 cm)
Lower Length w/ Back Wheel RemovedN/A
Width (B)30 in (76.2 cm)
Height (C)56 in (142.2 cm)
Weight285 lbs (104.4 kg)
Drill Distance From Corner3 in (7.6 cm)
Drill Distance From Groundup to 12 in (30.5 cm)
Drill Depth (std.)18 in (45.7 cm)
Drill Bit Diameter5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
Rock Drill motor (pneumatic)CP 32A
Drill Motor Weight54 lbs (24.5 kg)
Chuck Size (std.)7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Air Consumption (minimum)100 cfm (2.8 m 3 /min)
Operating Pressure90 psi (6.2 bar)
Impact (ft. lbs./blow)36 fpb (49 J)
Hammer Speed2200 bpm
Speed288 rpm
Core Drill Motor (pneumatic)CS Unitec
Drill Motor Weight18 lbs (8 kg)
Bit Connection1 1/4 in x 7 in UNC
Air Consumption (minimum)77 cfm (2.2 m 3 /min)
Air Motor2.1 HP (1.6 kW)
3 – speed (rpm)400 rpm, 900 rpm, 1600 rpm

Enquire about this Drill - Call +44 (0)1908 281145

Subscribe to our Newsletter to get Important News & Amazing offers

Castellan Group
Unit 8 Rook Tree Farm
Hulcote
Milton Keynes
MK17 8BW

Tel: 01908 281145 email: info@castellan.co.uk